1. High performance RF chip is adopted, crystal vibration is stable and frequency point is accurate;
2. Long transmission distance, no directionality, high transmission sensitivity and no signal barrier;
3. It can copy most of the fixed code and learning code wireless remote control, with fast copy speed and simple operation;
4. After copying, the original remote control will not be affected;
5. Copy the code automatically and use it directly without coding.
Product model: AK-KBJ027-3
Working voltage: 6V
Encoding type: copy,cloning
Working frequency: 433MHz
Modulation mode: ASK
Number of keys: 3 keys
Launch distance: 50m (in open environment)
Product size: 60*31*11mm/2.36*1.22*0.43\'\'
Chip models that can be copied:
1.PT2242;2.PT2260;3.PT2262;4.EV1527;5.527;6.PT2240;7.SMC918;8.HT-12E;9.AX5326-3;10.AX5326-4;11.AX5026;12.HT600;13.HT680;14.HT6207;15.HT6010;16.HT6012;17.HT6014;18.MC145026;19.HT640;20.SMC926;21.HT12D etc wireless remote control with fixed code and learning code.
1. Clear code: press and hold the front (upper) two buttons at the same time, the LED indicator flashes three times, release any one of the buttons (keep the other pressed and held), press the released button three times, the LED indicator enters the fast flashing state, indicating that the code clearing is completed (the remote controller that has cleared the code, short press, the LED indicator is not on).
2. Copy: hold the original remote control and another copy remote control. The two remote controls are close to each other. Press the button of the copy respectively. The LED indicator light flashes three times quickly and stays on, indicating that the copy is successful. The operation methods of other buttons are the same.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X Remote Control Duplicator